5
|
Operation
User reference guide
35
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05
To connect the wireless adapter to your home network
The wireless adapter can be connected to your home network using the:
▪
WPS
button on the router (if present),
▪
SSID
and
KEY
number located on the unit.
To connect using the WPS button
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the WPS setting display (menu ) appears.
3
Press
to confirm the selection.
Result:
is blinking. The timer LED is blinking.
4
Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the AP mode display (menu ) appears.
3
Press
to confirm the selection.
Result:
is blinking. The operation and timer LEDs are blinking alternately.
4
Connect your smart device to the access point in the same way as to a
standard wireless network.
5
Enter the SSID number and password located on the unit or in the accessory
set.