Daikin FTXQ25AMV1B, Installer'S Reference Manual

Page: 23 / 52

6 | Unit installation
Installer reference guide
23
35AMV1B35AMV1B
Daikin room air conditioner
4P513661-10K – 2021.07
a Upper hook
b Symbol with 3 circles
4 We recommend opening the flap before removing the front grille.
5 Place both hands under the centre of the front grille, push it up and then
toward you.
1
2
6.2.4 To remove the electrical wiring box cover
1 Remove the front grille.
2 Remove 1 screw from the electrical wiring box.
3 Open the electrical wiring box cover by pulling the protruding part on the top
of the cover.
4 Unhook the tab on the bottom and remove the electrical wiring box cover.
c
b
b
a
a
1
1
3
2
a Tab
b Protruding part on the top of the cover
c Screw
6.3 Mounting the indoor unit
In this chapter
6.3.1 To install the mounting plate................................................................................................................................. 23
6.3.2 To drill a wall hole .................................................................................................................................................. 24
6.3.3 To remove the pipe port cover .............................................................................................................................. 25
6.3.1 To install the mounting plate
1 Install the mounting plate temporarily.
2 Level the mounting plate.
3 Mark the centres of the drilling points on the wall using a tape measure.
Position the end of tape measure at symbol " ".