![background image](http://html1.mh-extra.com/html/daikin/ftxp35n5v1b9/ftxp35n5v1b9_user-reference-manual_4699051041.webp)
8
|
Troubleshooting
User reference guide
41
FTXP20~35 ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
Problem
Measure
The wireless LAN is NOT visible on the
unit overview screen (Home screen)
after configuration of the WLAN
adapter (WPS option).
▪
Make sure the wireless LAN is close
enough to the communication device.
▪
Check if communication is OK.
▪
Make sure that the smart device is
connected to the same wireless
network as the wireless LAN.
▪
Try resetting to the factory default
and repeat the setting. See
the connection setting to the factory
default"
26].
The wireless LAN is NOT visible in the
available Wi-Fi networks list on the
smart device (Access point option).
▪
Try switching between access point
and WPS setting to change the
wireless
channel.
The
wireless
channel MUST be between 1~13.
▪
Check if communication is OK.
▪
Try resetting to the factory default
and repeat the setting. See
the connection setting to the factory
default"
26].
Displayed indoor/outdoor temperature
value in ONECTA differs from the value
measured by other appliances.
▪
ONECTA
displays
indoor/outdoor
temperature only for the indoor/
outdoor unit's surrounding.
▪
Measured temperature for other
appliances may differ due to different
condition around the unit (e.g. direct
sunlight, frost accumulation…)
▪
Temperature displayed in ONECTA is
only referential.