Fan Motor / Fan Rotor
Si041259EA
18
Removal Procedure
9. Fan Motor / Fan Rotor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Remove the 2 screws
and remove the right
side plate.
2
Remove the screw and
remove the fan motor
fixing plate.
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
(1) Insert the fan motor with
approx. 5 mm (0.2 inch) left.
(2) Tighten the screw until it
stops. Then give the screw
one more turn.
(3) Rotate the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
(4) Tighten the screw
completely if appropriate.
(5) If not appropriate, go back to
(1).
3
Loosen the lock screw
and remove the fan
motor.
4
Remove the fan rotor.
(R19063)
Right side
plate
(R19064)
Fan motor fixing plate
5 mm (0.2 inch)
Side face of rotor
(R18879)
Side face of
bottom frame
(R9582)
(R19065)
Lock screw
Fan motor
(R19066)
Fan rotor