manualshive.com logo in svg

Daikin FTXM20W1VMA, Operation Manual

Share
Download
Daikin FTXM20W1VMA Operation Manual Download Page 108

11

Read Before Operation

 

 

 

„

To set the clock

1. 

Press 

 .

“ 

 ” appears on the LCD.

“ 

 ” and “ 

 ” blink.

2. 

Press 

 to set the current day of the week.

Display

Day of the week

MON

Monday

TUE

Tuesday

WED

Wednesday

THU

Thursday

FRI

Friday

SAT

Saturday

SUN

Sunday

3. 

Press 

 .

“ 

 ” blinks.

4. 

Press   to set the clock to the present time.

• 

Holding down   or   rapidly increases or decreases the displayed time.

5. 

Press 

 .

• 

Point the remote controller at the indoor unit when pressing the button.

“ 

 ” blinks.

NOTE

Note on setting the clock

• 

If the indoor unit’s internal clock is not set to the correct time, the ON/OFF TIMER and WEEKLY TIMER will not operate punctually.

Preparation Before Operation

   

   

 

Summary of Contents for FTXM20W1VMA

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands