4-4-1 To start/stop Flash streamer operation
1.
Press
.
Result:
is displayed on the LCD and the air in the room
is cleaned.
2.
To stop operation, press
.
Result:
disappears from the LCD and operation stops.
4-5 OFF/ON timer operation
Timer functions are useful for automatically switching the air
conditioner on/off at night or in the morning. You can also use
OFF timer and ON timer in combination.
INFORMATION
Programme the timer again in case of:
•
A circuit breaker has turned the unit off.
•
A power failure.
•
After replacing batteries in the remote controller.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to “3-3-1 To set the clock” on page 5.
4-5-1 To start/stop OFF timer operation
1.
Press
to start.
Result:
is displayed on the LCD, the timer lamp
lights up, and
blinks. and the day of the week
disappear from the LCD.
2.
Press
or
to change the time setting.
3.
Press
again.
Result:
and the set time are displayed on the LCD.
Result:
The timer lamp lights up.
INFORMATION
Each time
or
is pressed, the time setting advances
by 10minutes. Holding the button down will change the
setting rapidly.
4.
To stop operation, press
.
Result:
and
disappear from the LCD and the timer
lamp goes off. and the day of the week are displayed on the LCD.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the remote
controller batteries are replaced.
4-5-2 To start/stop ON timer operation
1.
Press
to start.
Result:
is displayed on the LCD, the timer lamp
lights up, and
blinks. and the day of the week
disappear from the LCD.
2.
Press
or
to change the time setting.
3.
Press
again.
Result:
and the set time are displayed on the LCD. The
timer lamp lights up.
INFORMATION
Each time
or
is pressed, the time setting advances
by 10 minutes. Holding the button down will change the
setting rapidly.
4.
To stop operation, press
.
Result:
and
disappear from the LCD and
the timer lamp goes off. and the day of the week are
displayed on the LCD.
4-5-3 To combine OFF timer and ON timer
1.
To set the timers, refer to “4-5-1 To start/stop OFF timer
operation” on page 11 and “4-5-2 To start/stop ON timer
operation” on page 11.
Result:
and
are displayed on the LCD.
Example:
Display
Current time
Set while…
Operation…
6:00
the unit is
operating.
stops at 7:00
and starts at
14:00.
the unit is NOT
operating.
starts at 14:00.
Note:
If the timer setting is active, the current time is NOT
displayed on the LCD.
11
01_EN_3P524249-1.indd 11
6/12/2018 1:47:32 PM
