Daikin FTXF50UV16V, Operation Manual

Page: 6 / 33

Operation
AUTO • DRY• COOL • HEAT• FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
■
To start operation
■
To stop operation
1. Press
f
ODE
J
and select an
3_ Press
[t1/
again.
operation mode.
• Each pressing of the button
changes the mode setting in
sequence.
[ 1:J-I J-1:J-I
j-l�AN
I 7
2. Press�.
• " DlD " is displayed on the LCD.
• The OPERATION lamp lights
green.
□
'"
""'
• " [t]D " disappears from the LCD.
• Then OPERATION lamp goes off.
■
To change the temperature
setting
4. Press
[�Pl.
• Press _. to raise the temperature and
press T to lower the temperature.
COOL HEAT AUTO DRY or FAN
operation operation operation operation
The temperature
18-32
°
C 10-30
°
C 18-30
°
C
setting cannot
be changed.
Default Set Temperature Setting : As per BEE regulation, whenever Air Conditioner will be switched
ON from the remote, the default set temperature will be set as mentioned in below table:
Mode Set temperature before remote switched OFF Set temperature after remote switched ON
If set temperature= 24'C Default set temperature will be 24'C.
Cool
If set temperature » 24
·c
Default set temperature will remain same
as set prior to remote switched OFF.
Note:
Whenever AC is switched OFF in dry mode and is switched ON from remote, air conditioner will
start in Cool mode and then DRY mode selection can be done using the MODE button.
NOTE
■ Notes on AUTO operation
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based
on the indoor temperature and starts the operation.
• The system automatically reselects setting at a regular interval to bring the indoor temperature to
the user-setting level.
■ Note on COOL operation
• This air conditioner cools the room by releasing heat in the room outdoors. Therefore, cooling
performance may fall in higher outdoor temperatures.
■ Note on HEAT operation
• This air conditioner heats the room by bringing outdoor heat indoors. Therefore, heating
performance may fall in lower outdoor temperatures.
■ Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically
controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
■ Note on FAN operation
This mode is valid for fan only.
■ Recommended temperature setting
• For cooling: 26-28 ° C • For heating 20-24 ° C
5