16
HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to record your preferred temperature and air
flow rate settings.
■
To start HOME LEAVE
operation
1. Press “HOME LEAVE button” .
• The HOME LEAVE lamp lights up.
■
To cancel HOME LEAVE
operation
2. Press “HOME LEAVE button” again.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
■
■
■
■
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate
for HOME LEAVE operation. Record your preferred temperature and air flow rate.
1. Press “HOME LEAVE button”. Make sure “
” is displayed in the remote control
display.
2. Adjust the set temperature with “
” or “
” as you like.
3. Adjust the air flow rate with “FAN” setting button as you like.
Home leave operation will run with these settings the next time you use this function. To change
the recorded information, repeat steps 1 – 3.
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT
SENSOR
ON
CANCEL
OFF
1, 2
ON
OFF
Initial setting
Selectable range
temperature
Air flow rate
temperature
Air flow rate
Cooling
25
°
C
AUTO
18-32
°
C
5 step, AUTO and SILENT
Heating
25
°
C
AUTO
10-30
°
C
5 step, AUTO and SILENT
01_EN_3P098590-2L.fm Page 16 Thursday, July 28, 2005 4:55 PM
