Daikin FTX20KV1B, Operation Manual

Page: 15 / 32

14
Basic Operation
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the flap. Moving the flap forcibly by hand may cause
a malfunction.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airflow direction
Press .
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
To set the flap at the desired position
• This function is effective while the flap is in auto swing mode.
Press when the flap reaches the desired
position.
• “ ” disappears from the LCD.
To adjust the louvers at desired position
Hold the knobs and move the louvers (vertical blades).
FTX20KV1B / FTX25KV1B /
FTX35KV1B
FTX50KV1B / FTX60KV1B
Knobs Knobs
Knobs Knobs
NOTE
Notes on airflow direction setting
• The movable range of the flap varies according to the operation mode.
• The flap will stop at the upper position when the airflow rate is changed to low during the
up and down swing setting.
Movable range of the flap
COOL / DRY
HEAT FAN ONLY