![background image](http://html1.mh-extra.com/html/daikin/ftky25wavmv/ftky25wavmv_operation-manual_4703574012.webp)
OPERATION
OPERATION
Adjusting the Airflow Rate
•
You can adjust the airflow rate to increase your comfort.
To adjust the airflow rate setting
Press
.
• Each pressing of
change the airflow rate setting in sequence
shown below.
Auto
Indoor unit quiet
Low
High
•
When the airflow is set to “
”, indoor unit quiet operation will start
and the noise from the unit will become quieter.
•
In indoor unit quiet operation, the airflow rate is set to a weak level.
• If the temperature dose not reach the desired point, change the
airflow rate setting.
•
In DRY mode, the airflow rate setting is not available.
•
If COOL/DRY operation is started with airflow settings on “AUTO”,
the indoor unit will initially deodorise, which functions to suppress any
internal odours. As a result, the indoor unit will not emit air
immediately. (Wait for about 1 minute.)
•
At smaller airflow rates, the cooling effect is also smaller.
Tips for saving energy
• Be careful not to cool the room too much.
Keeping the temperature setting at a moderate level helps save energy.
- Recommended temperature setting for cooling is 26-28°C.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling effect.
•
Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every 2 weeks.
10
01_EN_3P658678-6A.indd 10
12/10/2564 15:01:42