background image

14

POWERFUL Operation

POWERFUL operation quickly maximizes the cooling 
(heating) effect in any operation mode. You can get the 
maximum capacity .

To start POWERFUL 
operation

1. Press “POWERFUL button”.

• POWERFUL operation ends in 20 minutes.  

Then the system automatically operates 
again with the settings which were used 
before POWERFUL operation.

• When using POWERFUL operation, 

there are some functions which are not 
available.

• “

” is displayed on the LCD.

To cancel POWERFUL 
operation

2. Press “POWERFUL button” 

again.

• “

” disappears from the LCD.

NOTE

Notes on POWERFUL operation

• POWERFUL Operation cannot be used together with ECONO or QUIET Operation. 

Priority is given to the function of whichever button is pressed last.

• POWERFUL Operation can only be set when the unit is running. Pressing the operation 

stop button causes the settings to be canceled, and the “

” disappears from the LCD.

In COOL and HEAT mode

To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased 
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.

In DRY mode

The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.

In FAN mode

The air flow rate is fixed to the maximum setting.

When using priority-room setting

See “Note for multi system”. (page 22.)

TEMP

ON/OFF

POWERFUL

MODE

FAN

SWING

SENSOR

ECONO

MOLD PROOF

TIMER

ON

CANCEL

OFF

QUIET

1, 2

01_EN_3P232468-7.fm  Page 14  Wednesday, June 4, 2008  10:20 AM

Summary of Contents for FTKS25EVMA



































Reviews: