Removal of Swing Motors (Pattern 2)
Si041049
28
Removal Procedure
9. Removal of Swing Motors (Pattern 2)
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the swing motors
for horizontal blades.
Caution
When reassembling, do not
confuse the installing order
of the 2 motors and the
colors of the connectors.
If you set the connectors or
motors opposite, the
horizontal blades do not
move smoothly or the noise
may be heard.
(1) Set the motor for the upper
blade first.
(connector: white)
(2) Then, set the motor for the
lower blade.
(connector: red)
(3) Fix the both motors with a
screw.
1
Remove the 3 screws.
2
Disconnect the
connectors to remove
the swing motors for the
horizontal blades.
2. Remove the swing motor
for vertical blades.
1
Remove the screw on
the rear side. Pull out
the drain hose.
2
Remove the screw of
the swing motor unit for
vertical blades.
(R13121)
Swing motor
for upper
blade
Swing motor
for lower
blade
(R13122)
Connector for
upper blade (white)
Connector for
lower blade (red)
(R13123)
Drain hose
(R13124)
Swing motor unit for vertical blades
