5
■
Outdoor Unit
■
Indoor Unit
1. Air filter
2. Air purifying filter with
photocatalytic deodorizing function:
• These filters are attached to the inside of the air
filters.
3. Air inlet
4. Front panel
5. Panel tab
6. Room temperature sensor:
• It senses the air temperature around the unit.
7. INTELLIGENT EYE sensor:
• It detects the movements of people and auto-
matically switches between normal operation
and energy saving operation. (page 18.)
8. Display
9. Air outlet
10. Flaps (horizontal blades):
(page 12.)
11. Louvers (vertical blades):
• The louvers are inside of the air outlet.
(page 13.)
12. Indoor Unit ON/OFF switch:
(page 10.)
• Push this switch once to start operation.
Push once again to stop it.
• The operation mode refers to the following
table.
• This switch is useful when the remote controller
is missing.
13. Operation lamp (green)
14. TIMER lamp (yellow):
(page 20.)
15. HOME LEAVE lamp (red):
(page 16.)
16. Signal receiver:
• It receives signals from the remote controller.
• When the unit receives a signal, you will hear a
short beep.
• Operation start .............beep-beep
• Settings changed..........beep
• Operation stop ..............beeeeep
■
Outdoor Unit
17. Air inlet:
(Back and side)
18. Air outlet
19. Refrigerant piping and inter-unit cable
20. Drain hose
21. Earth terminal:
• It is inside of this cover.
22. Outside air temperature sensor:
(Back side)
• It senses the ambient temperature around the
unit.
Appearance of the outdoor unit may differ from some models.
'
&
%
Mode
Temperature
setting
Air flow
rate
FTKS COOL
22
°
C
AUTO
FTXS AUTO
25
°
C
AUTO
01_EN_3P194444-1B.fm Page 5 Wednesday, February 28, 2007 1:35 PM
