17
■
What’s the HOME LEAVE operation
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air flow
rate which you use the most? HOME LEAVE operation is a function that allows you to record your favor-
ite set temperature and air flow rate. You can start your favorite operation mode simply by pressing the
HOME LEAVE button on the remote control. This function is convenient in the following situations.
■
Useful in these cases.
1.Use as an energy-saving mode
Set the temperature 2-3°C higher (cooling) or lower (heating) than normal. Setting the fan strength to the lowest setting
allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
• Every day before you leave the house...
• Before bed...
2.Use as a favorite mode
Once you record the temperature and air flow rate settings you most often use, you can retrieve them by
pressing HOME LEAVE button. You do not have to go through troublesome remote control operations.
NOTE
When you go out, push the “HOME LEAVE
Operation” button, and the air conditioner will
adjust capacity to reach the preset tempera-
ture for HOME LEAVE Operation.
When you return, you will be welcomed by
a comfortably air conditioned room.
Push the “HOME LEAVE Operation” button
again, and the air conditioner will adjust
capacity to the set temperature for normal
operation.
Set the unit to HOME LEAVE Operation before
leaving the living room when going to bed.
The unit will maintain the temperature in
the room at a comfortable level while you
sleep.
When you enter the living room
in the morning, the temperature
will be just right. Disengaging HOME
LEAVE Operation will return the tempera-
ture to that set for normal operation. Even
the coldest winters will pose no problem!
• Once the temperature and air flow rate for HOME LEAVE operation are set, those settings will be
used whenever HOME LEAVE operation is used in the future. To change these settings, please refer
to the “Before using HOME LEAVE operation” section above.
• HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in AUTO, DRY, and FAN mode.
• HOME LEAVE operation runs in accordance with the previous operation mode(COOL or HEAT) before using HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot be used at the same time.
Last button that was pressed has priority.
• The operation mode cannot be changed while HOME LEAVE operation is being used.
• When operation is shut off during HOME LEAVE operation, using the remote controller or the indoor
unit ON/OFF switch, “
” will remain on the remote controller display.
01_EN_3P098595-2N.fm Page 17 Tuesday, July 5, 2005 5:32 PM
