Accessories ® ~ ®
ITEM
QTY.
Remarks
ITEM
QTY.
Remarks
® Mountina plate
1
0
® Remote controller holder fixina screw (M3 x 20L
2
*
@ Mountina elate fixina screw (M4 x 25L)
6/7"
0
CO 4-Core wire (3. 7M)
1
*
© Wireless Remote Controller
1
0
(M) Tiewrap
6
*
@ Dry battery (AAA)
2
*
® Accessory filter
112·
*
® Indoor Unit Fixina Screw (M4 x 12U
2
0
® Gas pipe {3.0M)
1
*
® Operation Installation Manual
1+1
0
(9) Liquid pipe (3.0M)
1
*
@ E-Waste (Guideline)
1
0
® Drain socket
1
*
® Product warranty
1
0
® Heat insulation tape
1
*
Q) Remote controller holder
1
*
© Wi-Fi manual
1
*
'O' Applicable for all models '*'Applicable onlv for selected models. ,.,,, Quantitv mav varv model to model.
Note: The accessories parts included with the unit displayed on the packing case name plate/ Label of indoor and outdoor packing case
Table No.1
Precautions for Selecting a Location
• Before choosing the installation site, obtain user approval.
■
®l•i•ii
1
1,lle
The indoor unit should be positioned in a place where:
1) the restrictions on the installation requirements specified
in
"Indoor/Outdoor Installation Diagram"
are met,
2) both the air inlet and air outlet are unobstructed,
3) the unit is not exposed to direct sunlight,
4) the unit is away from sources of heat or steam,
5) there is no source of machine oil vapour
(this may shorten the indoor unit service life),
6) cool air is circulated throughout the room,
7) the unit is away from electronic ignition type
fluorescent lamps (inverter or rapid start type) as they
may affect the remote controller range,
8) the unit is at least 1 m away from any television or radio set
(the unit may cause interference with the picture or sound),
9) the unit can be installed at the recommended height (1.8m),
10) no laundry equipment is nearby.
■
•fflGi•l•li
1
1,114
The outdoor unit should be positioned in a place where:
1) the restrictions on the installation requirements specified
in
"Indoor/Outdoor Installation Diagram"
are met,
2) drain water causes no trouble or problem in particular,
3) both air inlet and outlet have clear paths of air
(they should be free of snow in snowy districts),
4) the unit is in a clear path of air but not directly exposed
to rain, strong winds, or direct sunlight,
5) there is no fear of inflammable gas leakage,
6) the unit is not directly exposed to salt, sulfidized
gases, or machine oil vapour (these may shorten the
service life of the outdoor unit),
7) operating sound or hot airflow does not cause trouble
to neighbours,
8) the unit is at least 3m away from any television or
radio antenna.
Outdoor Unit Installation Space Requirements
� CAUTION-------------
When carrying the outdoor unit during installation, wear gloves to avoid injury.
• Position the unit on a horizontal surface.
Any tilt in the unit (front to back, right to left) should be 3
°
or less to the horizontal.
• Where a wall or other obstacle is in the path of the outdoor unit's
intake or exhaust airflow, follow the installation space requirements below.
• For any of the below installation patterns, the wall height on the
outlet side should be 1200mm or less.
I
Wall facing one side
I
I
Walls facing two sides
I
More than 100
-�-�-
�
Viewed from
the front
Viewed from
the side
I
Walls facing three sides
I
-
r
More than 350
1200
or less
�___1.__
More
1
�
More than 351_
../J-
than 1oo
� -
c)f
..
•"00
More than 350
More than 50
More than 50
Side view
Top view
Top view
unit: mm
2
Summary of Contents for FTHT35UV16W
Page 20: ......
