background image

14

   

   

 

English

INTELLIGENT EYE Operation

 

INTELLIGENT EYE operation

“INTELLIGENT EYE” is the infrared sensor which detects the human movement.

If no one is in the room for more than 20 minutes, the operation automatically changes to energy saving 

operation.

The INTELLIGENT EYE sensor according to the following situations.

INTELLIGENT EYE operation is useful for energy saving

 

Energy saving operation

• 

If no presence detected in the room for 20 minutes, the energy saving operation will start.

• 

This operation changes the temperature –2°C in HEAT / +2°C in COOL / +2°C in DRY operation from set temperature.  

When the room temperature exceeds 30°C, the operation changes the tempe1°C in COOL / +1°C in DRY operation from set 

temperature.

• 

This operation decreases the airflow rate slightly in FAN operation only.

[Example]

When somebody is in

the sensing area

Normal operation

 

The air conditioner is in 

• 

normal operation while the 

sensor is detecting the 

movement of people.

When nobody in the 

sensing area

20 minutes later, start 

 

energy saving 

operation.

The set temperature is 

• 

shifted in ±2°C steps.

Somebody back to the 

sensing area

Back to normal 

 

operation.

The air conditioner will 

• 

return to normal operation 

when the sensor detects the 

movement of people again.

Summary of Contents for FTHF40RVLT

































































Reviews: