Daikin FT50GAVEA, Operation Manual

Page: 13 / 20

12
●
Check that the clock is correct.
If not, set the clock to the present time. (See page 8.)
Timer Operation
Timer functions are useful for automatically
switching the air conditioner on or off at night or in
the morning. You can also use OFF TIMER and
ON TIMER in combination.
OFF TIMER operation
ON TIMER operation
●
Check that the clock is correct. If not, set the
clock to the present time (See page 8).
●
NIGHT SET MODE
When the OFF TIMER is set, the air
conditioner automatically adjusts the
temperature setting (0.5°C up in COOL,
2.0°C down in HEAT) to prevent excessive
cooling (heating) for your pleasant sleep.
Press
OFF
while the air conditioner
is operating.
Press
CANCEL
.
■ ■
■ ■ ■
To cancel the timer:
Press OFF once again.
Then the TIMER lamp goes off.
2
3
Then the TIMER lamp lights up.
AM
is displayed.
blinks.
* Previous time setting
appears on display.
1
AM
Display
AM
Display
Notes on OFF TIMER
Press
TIMER
until the time setting
reaches the point you like.
●
Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either
button changes the setting rapidly.
Press
TIMER
until the time setting
reaches the point you like.
●
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
Press ON while the air conditioner is
not operating.
Press
ON
once again.
1
AM
Display
AM
is displayed.
blinks.
* Previous time setting
appears on display.
2
3
AM
Display
Then the TIMER lamp lights up.
AM AM
Display
Combining ON TIMER and OFF TIMER
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m. Combined


(Example)
ATTENTION
■
In the following cases, set the timer again.
●
After a breaker has turned OFF.
●
After a power failure.
●
After replacing batteries in the remote controller.
●
When TIMER is set, the present time is not displayed.
●
Once you set ON,OFF TIMER, the time setting is
kept in the memory. (The memory is canceled when
remote controller batteries are replaced.)
●
When operating the unit via the ON/OFF Timer, the
actual length of operation may vary from the time
entered by the user. (Maximum approx. 10 minutes.)
●
A sample setting for combining the two timers is shown below.
Notes on ON,OFF TIMER