12
Display
Then the TIMER lamp lights up.
Combining ON TIMER and OFF TIMER
●
When TIMER is set, the present time is not
displayed.
●
Once you set ON,OFF TIMER, the time setting
is kept in the memory. (The memory is canceled
when remote controller batteries are replaced.)
●
When operating the unit via the ON/OFF
Timer, the actual length of operation may vary
from the time entered by the user.(Maximum
approx. 10 minutes.)
●
A sample setting for combining the two timers is shown below.
Notes on ON,OFF TIMER
Display
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
(Example)
●
Check that the clock is correct.
If not, set the clock to the present time. (See page 8.)
Timer Operation
Timer functions are useful for automatically
switching the air conditioner on or off at night or in
the morning. You can also use OFF TIMER and ON
TIMER in combination.
OFF TIMER operation
ON TIMER operation
●
Check that the clock is correct. If not, set the
clock to the present time. (See page 8.)
●
NIGHT SET MODE
When the OFF TIMER is set, the air
conditioner automatically adjusts the
temperature setting (0.5°C up in COOL,
2.0°C down in HEAT) to prevent excessive
cooling (heating) for your
pleasant sleep.
Press
OFF TIMER
while the air conditioner
is operating.
Press
CANCEL
.
■
■
■
■
■
To cancel the timer:
Press
OFF TIMER
once again.
Then the TIMER lamp goes off.
2
3
Then the TIMER lamp lights up.
is displayed.
blinks.
1
Display
Display
Notes on OFF TIMER
Press
until the time setting
reaches the point you like.
●
Every pressing of either button increases
or decreases the time setting by 10
minutes. Holding down either button
changes the setting rapidly.
Press
until the time setting
reaches the point you like.
●
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
Press
while the air conditioner
is not operating.
Press
once again.
1
Display
is displayed.
blinks.
2
3
ATTENTION
■
In the following cases, set the timer again.
●
After a breaker has turned OFF.
●
After a power failure.
●
After replacing batteries in the remote controller.
Summary of Contents for FT50GAVAL
Page 20: ...3P062628 9N M00B043F 0601 HT...
