![background image](http://html1.mh-extra.com/html/daikin/ft25gv1g/ft25gv1g_operation-manual_3340059018.webp)
17
1. Open the front panel. (page 16.)
2. Pull out the air filters.
• Push a little upwards the tab at the center of each air
filter, then pull it down.
3. Take off Air-purifying filter with
Photocatalytic deodorizing
function.
• Hold the recessed parts of the frame and
unhook the four claws.
4. Clean or replace each filter.
See figure.
5. Set the air filter, Air-purifying filter with
Photocatalytic deodorizing function as
they were and close the front panel.
• Insert claws of the filters into slots of the front grille. Close the
front panel slowly and push the panel at the 3 points. (1 on
each sides and 1 in the middle.)
■
Air Filter
1. Wash the air filters with water or clean them with
vacuum cleaner.
• If the dust does not come off easily, wash them with neutral detergent
thinned with lukewarm water, then dry them up in the shade.
• It is recommended to clean the air filters every two weeks.
■
Air-purifying filter with photocatalytic
deodorizing function (gray)
The air-purifying capacity of the photocatalytic purifying filter can be
renewed by washing it with water once every 6 months. We recommend
replacing it once every 3 years.
[ Maintenance ]
1. Remove dust with a vacuum cleaner and wash lightly with water.
2. If it is very dirty, soak it for 10 to 15 minutes in water mixed with a neu-
tral cleaning agent.
3. After washing, shake off remaining water and dry in the shade.
4. Since the material is made out of paper, do not wring out the filter
when removing water from it.
[ Replacement]
1. Remove the tabs on the filter frame and replace with a new filter.
• Dispose of the old photocatalytic deodorizing filter as flammable waste.
Filters
Air filter
Titanium Apatite
Photocatalytic
Air-Purifying Filter
Filter frame
Tab
Push
01_EN_3PN08530-10J.fm Page 17 Wednesday, November 25, 2009 3:51 PM