![background image](http://html1.mh-extra.com/html/daikin/ft18hevlk/ft18hevlk_operation-manual-and-installation-manual_2459303008.webp)
English
7
Description of remote control functions
■
Remote control operation
Note: Make sure there are no obstructions between the receiver and remote controller.
Do not drop or throw the remote controller. Do not allow liquid to get on the remote
controller. Do not put the remote controller in direct sunlight or places that are hot.
Remote controller
Signal transmitter
ON/OFF
• Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. The Timer and Sleep functions are
canceled when the unit is turned on or off,
but preset times are kept.
ON/OFF button
SLEEP
• Press the SLEEP button to select Sleep On
and Sleep Off. The default setting is Sleep
Off. After the unit is turned off, the Sleep
function is canceled. After the Sleep
function has been set up, the Sleep symbol
will show on the display. The timer can be
adjusted in this mode. In Fan and Auto
modes, this function is not available.
SLEEP button
FAN
• Press the FAN button to set the fan speed.
Auto, Low, Middle, or High speed can be
selected. The default fan speed is Auto. In
Dehumidify mode, only Low fan speed can
be selected.
Middle
Low
High
Note: The fan speed is not adjustable in Dry mode.
FAN button
MODE
• Press the MODE button to select Auto,
Cool, Dry, Fan, or Heat modes. While the
power is on the default mode is Auto. In
Auto mode, the temperature is not
displayed. In Heat mode the initial
temperature is 28°C (82°F). In other modes
the initial temperature is 25°C (77°F).
MODE button
AUTO
COOL
DRY
HEAT
(for cooling and heating units only)
FAN
CLOCK
• Press the CLOCK button to set the clock.
will blink and in 5 seconds, it can be set
by pressing the + or – buttons. Press and
hold this button for 2 seconds or more and
for each half second held, the tenth place
numeral will increase by 1. While is
blinking, press the CLOCK button again to
accept and keep the setting. After the unit
powered on, 12:00 is the default setting. The
symbol usually indicates the current time.
It displays the hour set for the timer function
only when the timer is set.
CLOCK button
LIGHT
• Press the LIGHT button to turn the light on
or off. When the LIGHT is turned on will
show and the display indicator light will be
on. When the LIGHT is turned off the will
show and the display indicator light will be
off.
LIGHT button
01_EN_3V007382-3J.indd 7
01_EN_3V007382-3J.indd 7
8/18/2010 9:14:32 AM
8/18/2010 9:14:32 AM