background image

10

(1)

(2)

(4)

(3)

(5)

(2)

(4)

(1)

(3)

Remote control operation

General Operation

(1) Turn the power on and press the ON/OFF button to start/stop 

operation.
(Note: When the unit is powered off, the main unit’s guide louver 
closes automatically.) 

(2) Press the MODE button to select a desired operation mode, or 

enter COOL or HEAT operation modes directly. 

(3) Press + or – button to set the desired temperature (not available 

in AUTO mode).

(4) Press the FAN button to set the fan speed. (AUTO, LOW, MID, 

HIGH) 

(5) Press      button to select the swing angle.

Options

(1) Press SLEEP button to set to sleep mode. 

(2) Press TIMER ON and TIMER OFF button to set the scheduled 

timer ON/OFF. 

(3) Press the LIGHT button to turn the LIGHT ON/OFF. (This function 

is not available on some units.) 

(4) Press the TURBO button to turn the TURBO function ON/OFF.

Special functions

„

 Blow function

After the unit is stopped, this function blows moisture off the indoor unit's evaporator to 
prevent mould.

1.  Blow function on: After turning off the unit, the  indoor fan operates for about 10 minutes 

at low speed. At this time, you can press the blow button to stop the indoor fan. 

2.  Having set blow function off: After turning the unit off by pressing the ON/OFF button, the 

blow function will stop running.

„

 AUTO RUN

When AUTO RUN mode is selected the temperature setting does not show on the LCD.
The unit automatically selects a suitable operation mode and adjusts to create a comfortable 
ambient temperature.

„

 Turbo function

The turbo function operates the fan at high speed to bring the ambient temperature up to the 
preset temperature as quickly as possible.

01_EN_3V007382-8J.indd   10

01_EN_3V007382-8J.indd   10

8/18/2010   9:17:17 AM

8/18/2010   9:17:17 AM

Summary of Contents for FT18HEV1K



























Reviews: