SiBE28-804
General Functionality
Functional Description
45
1.10 4-way Valve Control
Purpose
The purpose of the 4-way valve control is to control how the superheated refrigerant passes
through the 4-way valve. The 4-way valve control carries out the changeover switching of the 4-
way valve. This changeover switching is only carried out during operation, because a certain
pressure difference is required to move the internal cylinder.
Method
The table below describes the 4-way valve control operation.
Time chart
The time chart below illustrates the 4-way valve control.
When...
Then the 4-way valve connects the outlet of the compressor with...
Cooling
Outdoor heat exchanger
Heating
Indoor heat exchanger
In...
The 4-way valve is...
Heating, except for defrosting
ON
Cooling
Dry keep
Defrosting
OFF
Compressor
4-way valve
Defrosting
Unit mode
ON
OFF
OFF
ON
OFF
ON
Heating
Cooling/Dry
Summary of Contents for FHQ100BUV1B x 2
