![background image](http://html1.mh-extra.com/html/daikin/fdxs25lvma/fdxs25lvma_operation-manual_2460400019.webp)
18
ON TIMER Operation
To use ON TIMER operation
Check that the clock is correct.
•
If not, set the clock to the present time.
Page 10
Press
1.
.
“
•
” disappears from the LCD.
“
” is displayed on the LCD.
“
” blinks.
Press
2.
until the time setting reaches the
point you like.
Each pressing of either button increases or decreases the time setting by 10 minutes.
•
Holding down either button changes the setting rapidly.
Press
3.
again.
“
•
” and setting time are displayed on the LCD.
The TIMER lamp lights yellow.
•
Display
To cancel ON TIMER operation
Press
.
“
•
” disappears from the LCD.
“
•
” is displayed on the LCD.
The TIMER lamp goes off.
•
To combine ON TIMER and OFF TIMER
A sample setting for combining the 2 timers is shown below.
•
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
Combined
NOTE
In the following cases, set the timer again.
After a breaker has turned off.
•
After a power failure.
•
After replacing batteries in the remote controller.
•
01_EN_3P297309-1.indd 18
01_EN_3P297309-1.indd 18
10/22/2011 11:06:00 AM
10/22/2011 11:06:00 AM