6
English
5. Shut the suction grille.
Slowly push up the suction grille, and then securely hook it
onto the decoration panel while pushing the two knobs.
PRECAUTION
•
When closing the suction grille, the lace might be
pinched.
Make sure the lace has not come out of the suction grille
before closing it.
6. After turning on the power, press FILTER SIGN RESET
button.
The “Time to clean filter” display vanishes.
HOW TO CLEAN AIR OUTLET AND OUTSIDE PAN-
ELS
•
Clean with soft cloth
•
When it is difficult to remove stains, use water or neutral
detergent.
•
When the flap is extremely contaminated, remove it as below
and clean or exchange it.
(Flap for exchange is optional.)
NOTES
•
Do not use gasoline, benzene, thinner, polishing powder, liq-
uid insecticide. It may cause discoloring or warping.
•
Do not let the indoor unit get wet. It may cause an electric
shock or a fire.
•
Do not scrub firmly when washing the blade with water.
The surface sealing may peel off.
•
Do not use water or air of 120
°
F or higher for cleaning air fil-
ters and outside panels.
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Push it downward slowly while pressing the buttons pro-
vided on two spots. (Follow the same procedure for clos-
ing.)
2. Remove the lace of the suction grille.
Remove the laces hooked on the two metal fittings of the
panel body.
3. Detach the suction grille.
Open the suction grille 45 degrees and lift it upward.
4. Detach the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 2)
5. Clean the suction grille.
Wash with a soft bristle brush and
neutral detergent or water, and dry
thoroughly.
• When very grimy
Directly apply the type of detergent
used for cleaning ventilation fans or ovens, wait 10 minutes,
and then rinse with water.
NOTE
•
Do not wash the air conditioner with hot water of more than
120°F. Doing so may result in discoloration or deformation.
6. Reattach the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 2)
7. Reattach the suction grille.
Refer to item No. 2.
8. Fit the lace of the suction grille.
Fit in the reverse order of the procedure 2.
9. Close the suction grille.
Refer to item No. 1
START UP AFTER A LONG STOP
Confirm the following.
• Check that the air inlet and outlet are not blocked.
Remove any obstacle.
• Check if the ground is connected.
Might there be a broken wire somewhere?
Contact your dealer if there are any problems.
Clean the air filter and outside panels.
• After cleaning the air filter, make sure to attach it.
Good
Wrong
Suction grille
Lace
Does not
protrude to
the side
Fig. 3
Metal fittings
Lace
Tab
Connection
Fig. 4
01_EN_3P177429-11X.fm Page 6 Thursday, September 15, 2011 6:16 PM