Instruction
SiBE12-713
172
Operation Manual
FDK(X)S 50/60 C, FDK(X)S 25/35 E
Care and Cleaning
CAUTION
Cleaning the air filter
1.Removing the air filter.
• Rear suction
Pull the bottom side of the air filter backwards, over the bends. (2 bends for 25/35 type, 3 bends
for 50/60 type)
• Bottom suction
Pull the filter over the bends (2 bends for 25/35 type, 3 bends for 50/60 type) situated at the
backside of the unit.
2.Cleaning the air filter.
Remove dust from the air filter using a vacuum cleaner and
gently rinse them in cool water. Do not use detergent or hot
water to avoid filter shrinking or deformation. After cleaning
dry them in the shade.
3.Replacing the air filter.
• Rear suction
Hook the filter behind the flap situated at the top of the unit
and push the other side gently over the bends. (2 bends for 25/35 type, 3 bends for 50/60 type)
• Bottom suction
Hook the filter behind the flap situated at the middle of the unit and push the other side gently
over the bends. (2 bends for 25/35 type, 3 bends for 50/60 type)
• Only a qualified service person is allowed to
perform maintenance.
• Before cleaning, be sure to stop the operation
and turn the breaker OFF.
In case of back side
In case of bottom side
Main unit
Filter
Attach the filter to the
main unit while
pushing down on the
bends. (2 bends for
25/35 type, 3 bends
for 50/60 type)
Force
Force
Summary of Contents for F-Series
