D-EIMHP01601-22_00EN 4/25
1. INTRODUCTION
The unit is supplied and shipped with a holding charge of 0.5 bar nitrogen (N2). This unit must be charged with R410A
refrigerant.
Pay attention to the selection of your remote condenser. Make sure to select a remote condenser developed for use with R410A.
The EWLQ units can be combined with Daikin fan coil units or air handling units for air conditioning purposes. They can also be
used for supplying chilled water for process cooling.
The present installation manual describes the procedures for unpacking, installing and connecting the EWLQ units.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use
by lay persons.
Sound pressure level is less than 70 dB(A).
Table 1-Technical specifications
(1)
Model EWLQ
014
025
033
Dimensions HxWxD
(mm)
600x600x600
Machine Weight
(kg)
104
138
149
Connections
•
Chilled water inlet and outlet
G1
•
Condenser discharge connection (copper)
Y
•
Condenser liquid connection copper)
Model EWLQ
049
064
Dimensions HxWxD (
mm)
600x600x1200
Machine weight
(kg)
252
274
Connections
•
Chiller water inlet and outlet
(mm)
•
Condenser discharge connection
(copper)
•
Condenser liquid connection (copper)
G 1-1/2
3/4’’
3/4’’
5/8’’
5/8’’
Table 2-Electrical specifications
(1)
General EWLQ
014-064
Power supply
Phase
3N~
Frequency
(Hz)
50
Voltage
(V)
400
Voltage
tolerance
(%)
±10
(1) Refer to the operation manual or engineering data book for the complete list of specifications, options and features.
5/8
”
5/8
”
5/8
”
5/8
”
3/4"
3/4"
Summary of Contents for EWLQ014KCW1N
Page 23: ...D EIMHP01601 22_00EN 23 25 NOTES...
Page 24: ...D EIMHP01601 22_00EN 24 25...
