D-EIMHP01601-22_00EN 7/25
3
SELECTION OF LOCATION
The units are designed for indoor installation and should be installed in a location that meets the following requirements:
1. The foundation is strong enough to support the weight of the unit
and the floor is flat to prevent vibration and noise generation.
2. The space around the unit is adequate for servicing.
3. There is no danger of fire due to leakage of non-flammable gas.
4. Select the location of the unit in such a way that the sound generated by the unit does not disturb anyone.
Ensure that water cannot cause any damage to the location in case it drips out of the unit.
The equipment is not intended for use in a potentially explosive atmosphere
4
MAIN COMPONENTS
1. Compressor
2. Evaporator
3. Accumulator
4. Switchbox
5. Chilled water in
6. Chilled water out
7. Discharge stop valve
8. Liquid stop valve
9. Evaporator entering water temperature sensor (as accessory)
10. Evaporator leaving water temperature sensor
11. Freeze-up sensor
12. Digital Controller and display
13. Power supply intake
14. Ball valve (field installed)
15. Water filter (field installed)
16. Air purge valve (field installed)
17. T-joint for air purge (field installed)
18. Flow switch (with T-joint) (field installed)
19. Main switch
Summary of Contents for EWLQ014KCW1N
Page 23: ...D EIMHP01601 22_00EN 23 25 NOTES...
Page 24: ...D EIMHP01601 22_00EN 24 25...
