7
|
Unit installation
Installer reference guide
72
EPRA14~W1 + ETSH/X(B)16P30+50EF
Daikin Altherma 3 H HT ECH₂O
4P679467-1 – 2022.02
2
2
3
1
3
1
b
c
a
a
b
c
a
Transportation stay
b
Nut
c
Washer
1
Remove the nut (b) and washer (c) from both transportation stays (a).
2
Remove and discard the washers (c) and transportation stays (a).
3
Re-install the nuts (b) of the compressor mounting bolt and tighten to
10.1 N•m of torque.
4
b
a
a
a
a
a
a
Screw
b
Transportation stay
4
Remove the screws (a) (4×) from the transportation stay (b). Put the screws
(a) aside for later use (see To attach the compressor cover piece).
5
Remove and discard the transportation stay (b).
7.2.4 To close the outdoor unit
NOTICE
When closing the outdoor unit cover, make sure that the tightening torque does NOT
exceed 4.1 N•m.
