Daikin ETSH16P30E, User Reference Manual

Page: 51 / 68

5 | Operation
User reference guide
51
ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679470-1A – 2022.09
OR
a b c
a WLAN cartridge The WLAN cartridge needs to be inserted in the
user interface.
WLAN module The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel).
b Router Field supply.
c Smar app The ONECTA app needs to be installed on the
user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Configuration
To configure the ONECTA app, follow the in-app instructions. While doing this, the
following actions and information are needed on the user interface:
D
Wireless gateway
Malfunctioning
Operation
User profile
Room
[D] Wireless gateway
[D.1] Mode
[D.2] Reboot
[D.3] WPS
[D.4] Remove from cloud
[D.5] Home network connection
[D.6] Cloud connection
[D.1] Mode : Turn AP mode ON (= WLAN cartridge active as access point):
1 Go to [D.1]: Wireless gateway > Mode .
2 In the Enable AP mode screen, select Yes .
[D.2] Reboot : Reboot the WLAN cartridge:
1 Go to [D.2]: Wireless gateway > Reboot .
2 In the Reboot the gateway screen, select OK .
[D.3] WPS : Connect the WLAN cartridge to the router:
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the ONECTA app.
1 Go to [D.3]: Wireless gateway > WPS .