Daikin ERAP110MBYNN, Operation Manual

Page: 16 / 18

Operation manual
15
ERAP110~170MBYNN
Air-cooled condensing units
4PW22681-1
A
NNEX
I
Thermostat parameters
Thermostat control
The figure below shows the thermostat diagram.
The default value and the upper and lower limits of the thermostat
parameters are listed in the table below.
■
If the temperature is below the setpoint, the thermostat control
will check every LOADDOWN TIMER.
According to the deviation to the setpoint, no action, slow load
down (=–3%) or fast load down (=–7%) is required.
■
If the temperature is above the setpoint, the thermostat control
will check every LOADUP TIMER.
According to the deviation to the setpoint, no action, slow load
up (=+3%) or fast load up (=+7%) is required.
A
NNEX
II
Schedule timer example
To come to the schedule above following settings have to be made:
All days assigned to the same group will work according to the
settings of this group.
In this example setting:
■
all Mondays, Tuesdays, Thursdays and Fridays will work
according to the settings in group 1 (
),
■
all Wednesdays will work according to the settings in group 2
(
),
■
all Saturdays and Sundays will work according to the settings in
group 3 (
2
),
■
all holiday days will work according to the settings in the holiday
group (
).
All group settings of groups , ,
2
,
!
and work similar as
following example (settings for group 1):
A
NNEX
III
Floating setpoint working
The diagram and table below show the default value and the upper
and lower limits of the floating setpoint parameters on the evaporator.
THERMOSTAT Default value Lower limit Upper limit
Step difference - a
(K)
0.8
(a)
(a) can only be modified in the service menu
– –
Step difference - b
(K)
0.5
(a)
– –
Steplength - c
(K)
0.2
(a)
– –
Loadup timer
(sec)
12 12 300
Loaddown timer
(sec)
12 12 300
Setpoint
(°C)
7.0 4.0 16.0
Setpoint
Fast load up
Slow load up
No action
Slow load down
Fast load down
c b c c b c
a/2 a/2
MARCH
MON TUE WED THU FRI SAT SUN
1 G1 2 G1 3 G2 4 G1 5 G1 6 G3 7 G3
8 G1 9 G1 10 G2 11 G1 12 G1 13 G3 14 G3
15 G1 16 G1 17 G2 18 G1 19 G1 20 G3 21 G3
22 G1 23 H 24 H 25 H 26 H 27 H 28 H
29 H 30 G1 31 G2
Screen 1
Screen 2
Floating setpoint Default value Lower limit Upper limit
Maximum value
(°C)
3.0 0.0 5.0
D1
(°C)
20.0 20.0 43.0
D2
(a)
(a) rise in floating setpoint value for 10°C drop in ambient
(°C)
5.0 0.0 10.0
%(
2
2
%( # #2
#2#2 *#2
##### ####
#2#### ####
6 12 13 20
On
Off
time (h)
%( # #2
##/##
#"/## ##$#
2##/##
%( #! #"
!/## ##$#
-2/## ##$#
"#/## ##$#
0
°
C
5
°
C
D2
D1
Max, value
Ambient