Daikin EKHWET-BV3, Installer'S Reference Manual

Page: 37 / 120

7 | Unit installation
Installer reference guide
37
E120B
R32 Split series – Domestic hot water tank
4P680077-1A – 2022.11
4×
7.2.3 To close the indoor unit
1 Reinstall the switch box cover.
2 Reinstall the top cover.
3 Reinstall the bottom cover.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 2.94 N•m.
7.3 Mounting the indoor unit
7.3.1 About mounting the indoor unit
When
You have to mount the outdoor and indoor unit before you can connect the
refrigerant and water piping.
7.3.2 Precautions when mounting the indoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
"2 General safety precautions" [ 4 9]
▪
"7.1 Preparing the installation site" [
4
28]
7.3.3 To install the indoor unit
1 Install 2 plugs into the wall and insert (but not completely) 2 bolts with
washers into the plugs.