Daikin EKHBH016AA Operation Manual Download Page 11

Page: 11 / 20

EKHBH/X016AA

Indoor unit for air to water heat pump and sanitary warm water tank for air to water heat pump system

4PW36977-1B

Operation manual

Tips and tricks

Programming the next day(s)

After confirming the programmed actions of a specific day (i.e. after
pressing the

button for 5 seconds), press the

button once. You

can now select another day by using the

and

buttons

and restart consulting and programming.

Copying programmed actions to next day

In heating/cooling program it is possible to copy all programmed
actions of a specific day to the next day (e.g. copy all programmed
actions from "

" to "

").

To copy programmed actions to the next day, proceed as follows:

Press the

button.

The actual mode is blinking.

Use the

and

buttons to select the mode you want

to program.

The selected mode is blinking.

You can leave programming by pressing the

button.

Press the

button to confirm the selected mode.

The actual day is blinking.

Select the day you would like to copy to the next day by means
of the

and

buttons.

The selected day is blinking.

You can return to step

by pressing the

button.

Press the

and

buttons simultaneously for 5 seconds.

After 5 seconds the display will show the next day (e.g. "

" if

" was selected first). This indicates that the day has been

copied.

You can return to step

by pressing the

button.

Deleting one or more programmed actions

Deleting one or more programmed actions is done at the same time
as storing the programmed actions.

When all actions for one day have been programmed, make sure that
the display shows the highest action number you would like to save.
By pressing the

button for 5 seconds, you store all actions except

those with a higher action number than the one that is displayed.

E.g. when the

button is pressed when action number 3 is

displayed, actions 1, 2 and 3 are stored but 4 and 5 are deleted.

Deleting a mode

Press the

button.

The actual mode is blinking.

Use the

and

buttons to select the mode you want

to delete (quiet mode

, booster heating

or sanitary

heating

The selected mode is blinking.

Press the

and

button simultaneously for 5 seconds to

delete the selected mode.

Deleting a day of the week (cooling or heating mode)

Use the

button to select the operation mode (cooling or

heating) you want to delete.

Press the

button.

The actual mode is blinking.

Press the

button to confirm the selected mode.

The actual day is blinking.

Select the day you would like to delete by means of the

and

buttons.

The selected day is blinking.

Press the

and

button simultaneously for 5 seconds to

delete the selected day.

IELD

SETTINGS

The indoor unit should be configured by the installer to match the
installation environment (outdoor climate, installed options, etc.) and
user demand. Thereto, a number of so called field settings are
available. These field settings are accessible and programmable
through the user interface on the indoor unit.

Each field setting is assigned a 3-digit number or code, for example
[5-03], which is indicated on the user interface display. The first digit
[5] indicates the 'first code' or field setting group. The second and
third digit [03] together indicate the 'second code'.

A list of all field settings and default values is given under

"Field

settings table" on page 15

. In this same list, we provided for 2

columns to register the date and value of altered field settings at
variance with the default value.

A detailed description of each field setting is given under

"Detailed

description" on page 11

Procedure

To change one or more field settings, proceed as follows.

Press the

button for a minimum of 5 seconds to enter FIELD