EKEQFCBAV3-US (EEV KITS)
INSTALLATION INSTRUCTIONS
Safety Considerations
Optional kit to use in combination with Daikin condensing units
with field supplied non VRV air handler units.
Field supplied air handler units can be connected with a Daikin
condensing unit via a control box and expansion valve kit. Each
circuit or coil requires a separate control box and expansion valve
kit. This manual describes the installation of the expansion valve
kit and the installation and operation of the EKEQMCBAV3-US
control box.
The below mentioned cautions should be considered prior to
installation
•
Multi-module condensing units are permitted. However,
each refrigerant system cannot exceed the maximum
tonnage allowed by the applicable VRV heat pump system
type.
•
The automatic refrigerant charging and leak detection
function are not possible when the EKEQMCBAV3-US is
used.
•
The manufacturer of the outdoor unit has limited
responsibility for total performance of the system because
performance is determined by the total system. The
discharge air may fluctuate depending on selected
air handler units and depending on the installation
configuration.
•
Connectivity to DIII-net devices only allowed with:
- Intelligent Touch Manager
•
This equipment is not designed for year-round cooling
applications with low indoor humidity conditions, such as
Electronic Data Processing rooms.
Only personnel that have been trained to install, adjust, service
or repair(hereinafter, “service”) the equipment specified in this
manual should service the equipment. The manufacturer will not
be responsible for any injury or property damage arising from
improper service or service procedures. If you service this unit,
you assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require one or
more licenses to service the equipment specified in this manual,
only licensed personnel should service the equipment.
Improper installation, adjustment, servicing or repair of the
equipment specified in this manual, or attempting to install,
adjust, service or repair the equipment specified in this manual
without proper training may result in product damage, property
damage, personal injury or death.
WARNING
Only personnel that have been trained to install, adjust, service
or repair(hereinafter, “service”) the equipment specified in this
manual should service the equipment. The manufacturer will not
be responsible for any injury or property damage arising from
improper service or service procedures. If you service this unit,
you assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require one or
more licenses to service the equipment specified in this manual,
only licensed personnel should service the equipment.
Improper installation, adjustment, servicing or repair of the
equipment specified in this manual, or attempting to install,
adjust, service or repair the equipment specified in this manual
without proper training may result in product damage, property
damage, personal injury or death.
WARNING
Cancer and Reproduc
�
ve Harm
-
www.P65Warnings.ca.gov
PROP 65 WARNING
FOR CALIFORNIA CONSUMERS
0140M00517-A
WARNING
S
AFELYD ISPOSE OF ALLP ACKING ANDT RANSPORTATIONM ATERIALS
IN ACCORDANCE WITH FEDERAL
,
STATEA ND LOCALL AWSO R
ORDINANCES
. P
ACKING MATERIALSI NCLUDING NAILS
,
METAL
,
WOODEN PARTSA ND PLASTICP ACKING ITEMSU SEDI NT RANSIT MAY
RESULT IN INJURY OR DEATHB YS UFFOCATION
.
WARNING
Checking Product Received
Upon receiving the unit, inspect it for damage from shipment.
Claims for damage, either shipping or concealed, should be
filed immediately with the shipping company. Do not install this
accessory if it is determined that the integrity or safety has been
compromised by freight damage.
Check the unit model number, specifications, and electrical char-
acteristics to determine if they are correct. In the event an incor-
rect unit is shipped, it must be returned to the supplier and must
NOT be installed. The manufacturer assumes no responsibility for
installation of incorrectly shipped units.
Pre-Installation Instructions
Carefully read all instructions for the installation prior to installing
product. Make sure each step or procedure is understood and
any special considerations are taken into account before starting
installation. Assemble all tools, hardware and supplies needed to
complete the installation. Some items may need to be purchased
locally. Make sure everything needed to install the product is on
hand before starting.
19001 Kermier Rd., Waller, TX 77484
www.daikincomfort.com
IOD-7042D
08/2020
© 2015 - 2016, 2020
