Daikin EHYHBH05AA, User Reference Manual

Page: 15 / 24

4 Operation
User reference guide
15
EHYH EHYHBH/X05+08AA + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355632­1 – 2013.05
4.6.3 Reading out information
About reading out information
The amount of information you can read out in the menu structure
([6]: Information) depends on your user permission level:
▪ End user (= default)
▪ Adv. end user: You can read out more information.
To switch between user permission levels (End user and
Advanced end user)
1 Go to [6] or any of its submenus: > Information.
2 Press for more than 4 seconds.
Result: The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu
title.
3 If you do NOT press any button for more than 1 hour or press
again for more than 4 seconds, the user permission level
switches back to End user.
To read out information
Go to [6]: > Information.
Possible read­out information
If user permission level = End user, you can read out the following
information:
In menu… You can read out…
[6.1] Sensor information Room, tank or DHW, and outside
temperature.
[6.2] Energy metering Produced energy, consumed
electricity, and consumed gas.
[6.3] Error handling Error history and contact/
helpdesk number.
[6.4] User permission level Current user permission level.
If user permission level = Adv. end user, you can read out the
following additional information:
In menu… You can read out…
[6.1] Sensor information Room, tank or DHW, outside,
and leaving water temperature.
(If applicable)
[6.2] Energy metering Produced energy, consumed
electricity, and consumed gas.
[6.5] Actuators Status/mode of each actuator.
Example: Domestic hot water
pump ON/OFF.
[6.6] Operation modes Current operation mode.
Example: Defrost/oil return
mode.
[6.7] Running hours Running hours of the system.
[6.8] Version Version information about the
system.
4.6.4 Configuring date, time, units of
measurement, contrast and backlight
To configure time and date
Go to [1]: > Set time/date.
To configure units of measurement
Go to [7.6]: > User settings > Unit of measurement.
Possible units of measurement settings
Setting Possible units of measurement
Decimal point ▪ Dot
▪ Comma
Temperature ▪ °C
▪ °F
Produced energy ▪ kWh
▪ MBtu
Flow ▪ l/min
▪ GPM
Consumed gas ▪ m
3
▪ kWh
To configure the contrast of the user interface
Go to [7.1.1]: > User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Go to [7.1.2]: > User settings > Display > Backlit LCD time.
4.6.5 Configuring user profile and home pages
To set a user profile
1 Go to [7.1.3]: > User settings > Display > User profile.
2 Select a user profile and press .
Possible user profiles
If user profile = Detailed, you can see and do more on the home
pages.
User profile Example
Basic
15:20 Mon
Room
Actual temperature
20.0°C
Detailed
15:20 Mon
Room
Actual temperature
20.0°C
Tue 17:30
Scheduled