4
|
Components
Service manual
108
EBLA04~08E + EDLA04~08E
Daikin Altherma 3 M
ESIE22-09 – 2022.05
a
b
a
3-way valve knob
b
3-way valve motor
7
Route the 3‑way valve motor harness through the grommet in the switch box.
8
Connect the 3‑way valve motor wiring to the wire terminal X2M.
9
Install new tie straps to fix the 3‑way valve harness.
Is the problem solved?
Action
Yes
No further actions required.
No
Return to the troubleshooting of the
specific error and continue with the
next procedure.
4.2 4-way valve
4.2.1 Checking procedures
INFORMATION
It is recommended to perform the checks in the listed order.
To perform a mechanical check of the 4-way valve
Prerequisite:
Stop the unit operation via the user interface.
Prerequisite:
Turn OFF the respective circuit breaker.
1
Remove the required plate work, see
202].
DANGER: RISK OF BURNING/SCALDING
The coil gets hot while energized. Wait for it to cool down.
2
Verify that the screw is firmly fixing the coil to the valve body.
3
Check if any damage or burst is present.
draft – 31/05/2022 15:53
Summary of Contents for EBLA04E V Series
Page 322: ...14 14...
Page 323: ......