4
THIS PAGE INTENTIONALLY LEFT BLANK
Page 1: ...DO NOT TOUCH THE PCB OR ANY WIRE CONNECTED TO THE CONTROL PRIOR TO DISCHARGING YOUR BODY S ELECTROSTATIC CHARGE TO GROUND 2 FIRMLY TOUCH A CLEAN UNPAINTED METAL SURFACE OF THE UNIT AWAY FROM THE CONT...
Page 2: ...tion of all wiring and plug terminals recommend pictures and remove all wiring from PCB NOTE Thermal grease applied between the heat sink and the refrigerant loop allows for proper cooling of the PCB...
Page 3: ...grease from the cooling loop 7 Before installing the new board back in place evenly apply the thermal grease Figure 4 Figure 4 NOTE Additional Thermal grease part 9S00859 8 Insert the cooling loop in...
Page 4: ...4 THISPAGEINTENTIONALLYLEFTBLANK...
