SHIPPING INSPECTION
Shipping damage, and subsequent investigation is the responsibility of the
carrier. The distributor or manufacturer will not accept claims from dealers
for transportation damage or installation of incorrectly shipped units.
CODES & REGULATIONS
This product is designed and manufactured to comply with national codes.
Installation in accordance with such codes and/or prevailing local codes/
regulations is the responsibility of the installer. Please refer to the Codes
& Regulations in outdoor unit Installation and Operation manuals.
This device complies with Part 15 of the FCC’s Rules. Operation of this
device is subject to two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including
interference that may cause undesirable operation.
And this device meets the applicable Industry Canada technical specifications.
CAN ICES-3(B)/NMB-3(B)
The FCC responsible party is Goodman Manufacturing Company, L.P.,
and may be contacted by calling (713)-861-2500, or at 19001 Kermier Rd.,
Waller, TX 77484. (www.GoodmanMFG.com)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
3
English
01-FITQ AOR_DTA119A71_IM_EN.indd 3
2021/04/19 13:50:11
