Daikin Daikin Altherma 3 H F+W, User Reference Manual

Page: 31 / 60

4 | Operation
User reference guide
31
EABH/X16DF6V(7)+9W(7) + EAVH/X16S(U)18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F+W
4P556071-1C – 2021.09
Preset value Where used
Electricity prices
under [7.5]
User
settings >
Electricity
price
Restriction: Only
applicable if
Bivalent
is
enabled by the
installer.
[7.5.1] High You can use these preset values in
[7.5.4]
Schedule (weekly schedule
screen for the energy prices).
See "4.7.2 Setting the energy
prices" [
4
31].
[7.5.2] Medium
[7.5.3] Low
Additional to the user-defined preset values, the system also contains some
system-defined preset values that you can use when programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly schedule for
when the unit has to use which quiet mode level), you can use the following
system-defined preset values:
Quiet / More quiet / Most quiet .
4.7.2 Setting the energy prices
In the system, you can set the following energy prices:
▪ a fixed gas price
▪ 3 electricity price levels
▪ a weekly schedule timer for electricity prices.
Example: How to set the energy prices on the user interface?
Price Value in breadcrumb
Fuel: 5.3 euro cents/kWh [7.6]=5.3
Electricity: 12 euro cents/kWh [7.5.1]=12
To set the gas price
1 Go to [7.6]: User settings > Gas price .
2 Select the correct gas price.
3 Confirm the changes.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).
To set the electricity price
1 Go to [7.5.1]/[7.5.2]/[7.5.3]: User settings > Electricity
price > High / Medium / Low .
2 Select the correct electricity price.
3 Confirm the changes.
4 Repeat this for all three electricity prices. —
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).