background image

15

English

Deutsc

h

Français

Nederlands

Español

Italiano

ÅëëçíéêÜ

P

o

rt

ugues

Ðóññêèé

Türkçe

 

COMFORT AIRFLOW and 
INTELLIGENT EYE Operation

The INTELLIGENT EYE incorporates infrared sensors to detect the presence of people in the 
conditioned room.
When these sensors detect people, the louvers will adjust the airflow direction to an area 
where people are not present. When there are no people in the sensing areas, the air 
conditioner will go into energy-saving mode.

„

To start operation

1.

Press “COMFORT/SENSOR” button and select an 
operation mode.

• Choose the desired operation mode out of the following sequence.

• Each time the “COMFORT/SENSOR” button is pressed a different setting option is displayed 

on the LCD. 

• When the flaps (horizontal blades) are swinging, the operating as above will stop the 

movement of them.

„

To cancel operation

2.

Press “COMFORT/SENSOR” button.

• Press the button to select “Blank”. 

NOTE 

Display

Operation mode

Explanation

COMFORT AIRFLOW

The flaps will adjust the airflow direction upward while 
cooling, and adjust the airflow direction downward while 
heating. (page 16.)

INTELLIGENT EYE

The sensors will detect the movement of people in the 
sensing areas and the louvers will adjust the airflow 
direction to an area where people are not present. When 
there are no people in the sensing areas, the air 
conditioner will go into energy-saving mode. (page 16.)

COMFORT AIRFLOW and 
INTELLIGENT EYE

The air conditioner will be in COMFORT AIRFLOW 
operation combined with INTELLIGENT EYE operation. 
(page 16.)

Blank

No function

„

Notes on “COMFORT AIRFLOW operation”

• The flap position will change, preventing air from blowing directly on the occupants of 

the room.

• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the 

same time. 

• The volume of air will be set to AUTO. If the upward and downward airflow direction is 

selected, the COMFORT AIRFLOW function will be canceled.

• Priority is given to the function of whichever button is pressed last. 

• The COMFORT AIRFLOW function makes the following airflow direction adjustments.

The flaps will move upward while cooling so that the airflow will be directed upward.
The flaps will move downward while heating so that the airflow will be directed 
downward.

• COMFORT AIRFLOW operation cannot be selected while FAN operation.

1, 2

Cooling operation

Heating operation

01_EN_3P232703-1.fm  Page 15  Thursday, December 18, 2008  5:51 PM

Summary of Contents for CTXU25G2V1B





































Reviews: