14
■
To adjust the airfl ow rate setting
Press
.
• Each pressing of
advances the air
fl
ow rate setting in sequence.
Auto
Indoor unit quiet
Low
Middle low
Middle
Middle high
High
• When the air
fl
ow is set to “
”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
• In indoor unit quiet operation, the air
fl
ow rate is set to a weak level.
• If the temperature does not reach the desired point, change the air
fl
ow rate setting.
• In DRY mode, the air
fl
ow rate setting is not variable.
NOTE
Notes on airfl ow direction setting
• The movable range of the
fl
ap varies according to the operation mode.
• The
fl
ap will stop at the upper position when the air
fl
ow rate is changed to low during the
up and down swing setting.
Notes on airfl ow direction setting
• Using 3/D air
fl
ow circulates cold air, which tends to collect at the bottom of the room, and
hot air, which tends to collect near the ceiling, throughout the room, preventing areas of
cold and hot developing.
Notes on airfl ow rate setting
• At smaller air
fl
ow rates, the cooling (heating) effect is also smaller.
CAUTION
• Always use a remote controller to adjust the angles of the
fl
aps and louvers. If you attempt to move the
fl
aps and louvers forcibly with hand
when they are swinging, the mechanism may be broken.
• Always use a remote controller to adjust the louvers angles. Inside the air outlet, a fan is rotating at a high speed.
Movable range of the flap
COOL / DRY
HEAT
FAN ONLY
