35
Care and Cleaning
1.
Take off the titanium
apatite deodorising fi lters.
1)
Open the upper front panel and pull out the air fi lters.
2)
Hold the recessed parts of the frame and unhook
the 4 claws.
Claw
2.
Clean or replace the titanium
apatite deodorising fi lters.
[Cleaning]
1) Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
• Do not remove the fi lter from the frame when
washing with water.
2) After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the fi lter to remove water from it.
[Replacement]
Dispose of the removed fi lters and
prepare new fi lters.
• Do not throw away the fi lter frame. Reuse the
fi lter frame when replacing the titanium apatite
deodorising fi lter.
• When attaching the fi lter, check that the fi lter is
properly set in the tabs.
Tabs
• Dispose of the old fi lter as non-fl ammable waste.
3.
Reattach the fi lters and
close the upper front
panel.
1) Return the panel support plate to its previous
position and close the upper front panel slowly.
2) Do not push on the panel to close it.
3) Turn on the unit using the remote controller.
Wait till the upper and lower front panels are
completely open. Then, turn off the unit using the
remote controller again.
ON/OFF
4)
Once the both panels close completely, gently
push the upper front panel to hook it into position.
“click”
“click”
“click”
NOTE
• Operation with dirty fi lters:
– cannot deodorise the air,
– cannot clean the air,
– results in poor heating or cooling,
–
may cause odour.
• Dispose of old fi lters as non-fl ammable waste.
• To order titanium apatite deodorising fi lter, contact the
dealer where you bought the air conditioner.
Item
Titanium apatite deodorising fi lter
(set of 2)
Part No.
KAF970A46 (without frame)
Titanium apatite deodorising fi lter
01_EN_3P472684-1.indd 35
6/13/2017 9:01:55 AM
Summary of Contents for CTXJ25RVMAW
Page 43: ...Memo 42...
