34
Care
When the Need Arises
14
FAQ
Indoor unit
Wireless LAN connecting adapter
Outdoor unit
Operation does not start soon.
When the unit is turned on again soon after
being turned off.
When the mode was reselected.
• This is to protect the air conditioner.
You should wait for about 3 minutes.
The fl ap does not start swinging
immediately.
• The air conditioner is adjusting the position of the fl ap.
The fl ap will start moving soon.
Different sounds are heard.
A sound like fl owing water
• This sound is generated because the refrigerant in
the air conditioner is fl owing.
• This is a pumping sound of the water in the air
conditioner and can be heard when the water is
pumped out from the air conditioner during COOL or
DRY operation.
• The refrigerant fl ows in the air conditioner even if the
air conditioner is not working when the indoor units
in other rooms are in operation.
Ticking sound
• This sound is generated when the cabinet and
frame of the air conditioner slightly expand or shrink
as a result of temperature changes.
Clicking sound during operation or idle time
• This sound is generated when the refrigerant control
valves or the electrical parts operate.
Clopping sound
• This sound is heard from the inside of the air
conditioner when the exhaust fan is activated while
the room doors are closed. Open the window or turn
off the exhaust fan.
The outdoor unit emits water.
In COOL or DRY operation
• Moisture in the air condenses into water on the cool surface of the outdoor
unit piping and drips.
* The appearance of the outdoor unit
may differ between different models.
The LEDs blink through the front panel.
• The lamp can be disabled via the mobile application.
Page 7
Indoor unit
Lights through
Inside
01_EN_3P440286-3D.indd 34
30-Apr-19 11:17:07 AM
