iom-cliwp-cf-eng
www.clima-flex.com.mx
10
FRESH AIR DAMPER
All standard models are equipped with a fresh air inlet positioned
internally within the unit, behind the front grill. This inlet is
strategically designed to facilitate the recirculation or supply of
fresh air from the exterior into the room. The dampers are initially
configured in the closed position by default at the factory and
require user intervention for adjustment if desired.
To access the damper, users must remove the four (4) screws
securing the front grill cover. (See Figure 5)
Figure 5. Fresh Air Damper
INSTALLATION
Figure 6. Adjustable Blade
For adjusting the airflow to meet specific building requirements, the
damper blade offers six distinct positions. After removing the four
(4) screws securing the front grill,
remove the screw holding the
damper blade, located on the interior left wall of the opening. This
action enables a complete opening of the damper. To regulate the
volume of fresh air entering the unit, users can position the damper
blade to their desired setting. (See Figure 6)
It is imperative not to leave the damper without the blade, as it may
remain open and fail to close when the unit is turned off, resulting
in continuous airflow.