Daikin BRP084C42, Installation Manual

Page: 14 / 48

12
Turn off the air conditioner before setting up wireless connection.
While operation is stopped, press the POWERFUL button
and hold the button for 5 seconds.
Press the TEMP button and select SP menu .
Press the POWERFUL button to confirm the selected setting.
• The wireless LAN connecting adapter lamp (orange) blinks more quickly.
Press the WPS button on your communication device
(e.g. router) within approximately one minute. Please refer to
the manual of your communication device.
• The wireless LAN connecting adapter lamp (orange) stays lit. If you fail to connect, refer to NOTE .
Press the CANCEL button to return to the default screen.
Connect your smart phone to your home network.
Open the Home screen of the DAIKIN Mobile Controller
application. The air conditioner will be listed there
(Fig. 4)
.
To connect the wireless LAN connecting adapter to your home network
Configuration
Configuration
Wireless Connection
Setting Section
Fig. 4
NOTE
The wireless LAN connecting adapter can be connected to your home network by means of:
• Simple connection (WPS connection), if there is a WPS button on the router.
• Access point connection (AP connection), if there is no WPS button on the router.
If there is a WPS button on your Wi-Fi router, please follow the below steps.

Simple connection (WPS connection)
Note on simple connection (WPS connection)
• If you fail to connect (the wireless LAN connecting adapter lamp continues to blink), repeat steps 1-6.
Alternatively, try connecting via your device directly. Please refer to “
Access point connection (AP connection)
”.
Page 13
1
2
3
4
5
6
7
8