Daikin BRC4C65, Operation Manual

Page: 9 / 20

5 English
13
OPERATION MODE SELECTOR BUTTON
Press this button to select OPERATION
MODE.
14
FILTER SIGN RESET BUTTON
Refer to the section of MAINTENANCE
in the operation manual attached to the
indoor unit.
15
INSPECTION/TEST OPERATION
BUTTON
This button is used only by qualified service
persons for maintenance purposes.
16
EMERGENCY OPERATION SWITCH
This switch is readily used if the remote
controller does not work.
17
RECEIVER
This receives the signals from the
remote controller.
18
OPERATING INDICATOR LAMP (Red)
This lamp stays lit while the air conditioner
runs. It flashes when the unit is in trouble.
19
TIMER INDICATOR LAMP (Green)
This lamp stays lit while the timer is set.
20
AIR FILTER CLEANING TIME
INDICATOR LAMP (Red)
Lights up when it is time to clean the air
filter.
21
DEFROST LAMP (Orange)
Lights up when the defrosting opera-
tion has started. (For straight cooling
type this lamp does not turn on.)
22
FAN/AIR CONDITIONING SELECTOR
SWITCH
Set the switch to “ ” (FAN) for FAN
and “ ” (A/C) for HEAT or COOL.
23
COOL/HEAT CHANGEOVER SWITCH
Set the switch to “ ” (COOL) for
COOL and “ ” (HEAT) for HEAT.
NOTES
• For the sake of explanation, all indica-
tions are shown on the display in Figure 1
contrary to actual running situations.
• Fig. 1-2 shows the remote controller with
the front cover opened.
• Fig. 1-3 shows this remote controller can
be used in conjunction with the one pro-
vided with the VRV system.
• If the air filter cleaning time indicator lamp
lights up, clean the air filter as explained
in the operation manual provided with the
indoor unit.
After cleaning and reinstalling the air fil-
ter, press the filter sign reset button on
the remote controller. The air filter clean-
ing time indicator lamp on the receiver will
go out.
01_EN_3P107422-29P.fm Page 5 Thursday, January 17, 2008 1:46 PM