9
OPERATION
■
To cancel ON TIMER and OFF TIMER operation
1
Press “
button” to select
ON TIMER or OFF TIMER.
●
The timer setting is displayed.
2
Press “
button” for at least
4 seconds.
●
The setting that has been made is cleared.
●
When the timer is set next time, the previous setting remains.
“
ON
” : blinks.
■
To combine ON TIMER and OFF TIMER
●
A sample setting for combining the two timers is shown below.
Example
ON TIMER for action after 1 hour
OFF TIMER for action after 3 hours
ON TIMER is set.
OFF TIMER is set.
Normal display
Timer Operation
0h
1h
2h
3h
4h
ON
Timer set to switch unit on
in 1hour & Off in 3hours
Unit switches ON
Unit switches OFF
Timer Operation when 2 controllers are connected
●
If two remote controllers are connected:
The air conditioner will operate in the following sequence if timer settings are made in both master and sub remote controllers.
0h
1h
2h
3h
4h
ON
Example
Settings in master remote controller (for living room): ON TIMER 1h/OFF TIMER 4h
Settings in sub remote controller (for bedroom): ON TIMER 2h/OFF TIMER 3h
* Timer settings are possible in the master and sub remote controllers respectively.
The air conditioner will operate according to the above sequence if the master and sub remote controllers are set to
different timer settings. Therefore, it is recommended to make timer settings in either one of the remote controller.
Set timer
Unit not in operation
Unit switches ON
(Settings enabled)
Unit in operation
(Settings disabled)
Unit switches OFF
(Settings enabled)
Unit not in operation
(Settings disabled)
01̲EN̲3P209820-1.indd Sec1:11
01̲EN̲3P209820-1.indd Sec1:11
2007/11/06 12:05:21
2007/11/06 12:05:21
