Daikin BRC1H82S Installation And Operation Manual Download Page 10

10 Starting up the system

Installation and operation manual

10

BS

Madoka wired remote controller

4P596265-1 – 2019.11

From the rear

P1P2

From the left

P1P2

From the bottom

P1P2

9.3

Closing the controller

CAUTION

Never touch the internal parts of the controller.

CAUTION

When  closing  the  controller,  be  careful  not  to  pinch  the
wiring.

NOTICE

To prevent damage, make sure the front of the controller is
clicked into the rear casing securely.

9.3.1

To close the controller

1

Click the front of the controller into the rear casing.

1

2

10

Starting up the system

The  controller  gets  its  power  from  the  indoor  unit.  It  will  start  up  as
soon as it is connected. For the controller to be operable, therefore
make sure the indoor unit is powered on.

Once  the  controller  is  powered,  it  will  automatically  start  up.  If  it  is
the first and only controller that is connected to the indoor unit, it will
automatically get designated as a "Normal" master controller.

INFORMATION

For more information on how to designate the controller to
be  of  a  different  type  (i.e.  operable  in  "Normal",  "Alarm
only",  or  "Supervisor"  mode,  as  master  controller  or  as
slave  controller),  see  the  installer  and  user  reference
guide.

11

Maintenance

11.1

Maintenance safety precautions

WARNING

Before  carrying  out  any  maintenance  or  repair  activities,
stop  system  operation  with  the  controller,  and  turn  off  the
power  supply  circuit  breaker. 

Possible  consequence:

electric shock or injury.

NOTICE

To clean the controller, do NOT use organic solvents, such
as paint thinner. 

Possible consequence: 

damage, electric

shock, or fire.

WARNING

Do 

not 

wash 

the 

remote 

controller. 

Possible

consequence: 

electric leakage, electric shock, or fire.

INFORMATION

When  the  dirt  on  the  surface  cannot  be  removed  easily
while  cleaning  the  controller,  soak  the  cloth  in  neutral
detergent diluted with water, squeeze the cloth tightly, and
clean the surface. Afterwards, wipe dry with a dry cloth.

11.2

To clean the controller

1

Wipe the screen and other surface parts of the controller with a
dry cloth.

Summary of Contents for BRC1H82S













Reviews: