14 About the app
Installer and user reference guide
41
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
INFORMATION
To use this function, it is required that the indoor units are
equipped with a motion sensor (optional accessory).
INFORMATION
This function is not supported when the system contains
Sky Air RR or RQ outdoor units.
14.5.25 Quick start
Activate Quick start to quickly bring the room to a comfortable
temperature.
When Quick start is active, the outdoor unit operates with increased
capacity. Indoor unit fan speed gets controlled automatically, making
manual fan speed changes impossible.
After activation, Quick start is active up to 30 minutes. After 30
minutes, Quick start automatically deactivates, and the system
resumes normal operation. Additionally, Quick start will deactivate
from the moment you change the operation mode manually.
Quick start can ONLY be activated when the system is running in
Cooling, Heating, or Auto operation mode.
INFORMATION
This function is only available for Sky Air indoor units.
INFORMATION
This function is not supported when the system contains
Sky Air RR or RQ outdoor units.
14.5.26 External input interlock
External input interlock allows for the integration of external contacts
in the system's control logic. By adding a key card contact and/or a
window contact to the control setup, it is possible to have the system
respond to the insertion/removal of a key card in/from a card reader,
and/or the opening/closing of windows.
For more information, see
"About external input interlock" on
INFORMATION
To use this function, it is required that digital input adapter
BRP7A5* is part of the system.
▪ Make sure that the digital input adapter and its optional
contacts (window contact B1 and key card contact B2)
are correctly installed. Confirm that the voltage free
contact of the digital input adapter is in the correct
position. For instructions on how to install the digital
input adapter, see the installation manual of the digital
input adapter.
▪ When the digital input adapter does not function
properly, external input interlock is not available in the
menu.
▪ When the digital input adapter is part of the system, the
system does not allow for the connection of a slave
controller.
▪ When the digital input adapter is part of the system, it is
not possible to use the Schedule function.
▪ When the digital input adapter is part of the system, as
well as a centralised controller, the external input
interlock function is controlled by the centralised
controller, and not by the adapter.
14.5.27 Defrost operation
Make the system run in defrost operation mode, this to prevent the
loss of heating capacity due to frost accumulation in the outdoor unit.
INFORMATION
The system will return to normal operation after
approximately 6 to 8 minutes.
14.5.28 Function lock
Make functions and operation modes unavailable by locking them. It
is possible to lock the following functions and operation modes:
Remote controller
▪ Menu button
Functions
▪ Setpoint
▪ Fan speed
▪ Operation mode
▪ Airflow direction
▪ System ON/OFF
▪ Setpoint range
▪ Setback
▪ Presence sensor - Setpoint
adjustment
▪ Presence sensor - Auto OFF
▪ Setpoint adjustment timer
▪ OFF timer
▪ Power consumption limit
▪ Schedule
▪ Filter auto clean
▪ Date and time
▪ Draught prevention
▪ Airflow direction range
▪ Duty rotation
▪ External input interlock
▪ Individual airflow direction
▪ Ventilation rate
▪ Ventilation mode
Operation modes
▪ Automatic
▪ Cooling
▪ Heating
▪ Fan
▪ Dry
▪ Ventilation
INFORMATION
▪ When you lock an operation mode that is active at the
moment of locking, that mode will still be active upon
saving settings and leaving the menu. Only when you
change the operation mode, that mode will not be
available anymore.
▪ When you lock ALL operation modes, it will not be
possible to switch to an operation mode other than the
one that is active at the moment of locking.
Remote controller
Locking functions and operation modes from the app results in
changes on the remote controller.
