12 Operation
Installer and user reference guide
17
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
Status icons
For the meaning of the status icons, see
.
Software version
a
a
Software version
INFORMATION
▪ The presence of icons on the information screen
depends on operation status. The controller may
display more or less icons than are indicated here.
▪ The information screen always displays the current
software version, regardless of operation status.
To enter the information screen
Prerequisite:
The controller displays the home screen.
1
Press
and keep it pressed until the information screen
appears.
12.1.4
Main menu
From the home screen, press
to enter the main menu. Use
and
to cycle through the menus. Press
again to enter one of
the menus.
Menu
Description
Operation mode
. Set the operation mode.
Date and time
. Make date and time settings.
Airflow direction
. Set the indoor unit airflow
direction.
Fan speed
. Set the indoor unit fan speed.
Ventilation mode
. Set the ventilation operation
mode.
Ventilation rate
. Set the fan speed for ventilation
operation.
Menu
Description
Bluetooth
. Activate Bluetooth to control the system
with the Madoka Assistant app, and/or to perform a
remote controller software update.
INFORMATION
▪ Depending on the type of indoor unit you are operating,
more or less menus may be available.
▪ In the main menu, the icon for each menu reflects the
current active setting or mode. When operating the
controller, the menu you navigate through can look
different from that represented in this manual.
▪ The controller only allows for basic operation of the
system. For advanced operation (setback, schedule
timer, …), see the Madoka Assistant app.
INFORMATION
It is possible that menus are locked. When this is the case,
they appear crossed-out in the main menu, and get
accompanied by a lock icon. The locking of functions
happens through the Madoka Assistant app. For more
information, see the Madoka Assistant app and
"14.5.28 Function lock" on page 41
12.2
Operation mode
The indoor unit can operate in various operation modes.
Icon
Operation mode
Cooling.
In this mode, cooling will be activated as
required by the setpoint, or by Setback operation..
Heating
. In this mode, heating will be activated as
required by the setpoint, or by Setback operation.
Fan Only
. In this mode, air circulates without heating
or cooling.
Dry
. In this mode, the air humidity will be lowered with
a minimal temperature decrease.
The temperature and fan speed are controlled
automatically and cannot be controlled by the
controller.
Dry operation will not function if the room temperature
is too low.
Ventilation
.In this mode, the space gets ventilated,
but not cooled or heated.
Air Clean
. In this mode, the optional air cleaning unit
operates.
Venti Air Clean.
Combination of ventilation
and air clean operation.
Auto.
In Auto mode, the indoor unit automatically
switches between heating and cooling mode, as
required by the setpoint.
