6
English
Prepare the cabling for connection to the remote controller following these instructions:
Remove the cable jacket
and insulation
Cutting guideline
Approx. 3/8 inch
To simplify the wiring, maintain
a 3/8in difference between the
length of the two conductors.
Length of jacket to be removed:
Approx. 6 inch for top left outlet
●
Approx. 8 inch for top center outlet
●
Connect the terminals (P/P1, N/P2) of the remote controller to the terminals (P1, P2) of the
indoor unit. (P1 and P2 are not polarity sensitive.)
Back outlet
3-5-1
<Cable attachment guideline>
Lower case
P1
Indoor unit
P2
Upper case
PC-board
Clamp
Cable attachment
point
Cross-section
-
Secure the cable at
the attachment point
by using furnished
clamping material.
Clamp
01_EN_3P243521-2B.indd 6
01_EN_3P243521-2B.indd 6
8/27/2009 2:00:09 PM
8/27/2009 2:00:09 PM
Summary of Contents for BRC1E71
Page 23: ...22 English ...
Page 68: ...3P243521 2B EM09A032 0909 HT ...
